Free resin art price calculator

Price resin crafts on materials plus your minutes — not materials alone

Resin itself is cheap by the ounce. What makes a piece cost money is everything around it — the mold wearing out pour by pour, the findings and packaging, and above all your hands-on minutes across mixing, pouring, demolding, and sanding. Enter what one piece really costs you, pick the margin you want to keep, and get an Etsy price that holds that margin once Etsy's fees come off the top. It updates as you type, and it runs entirely in your browser.

Resin cost calculator: what one piece costs you

YOUR PIECE, COSTED

Resin

1.5 fl oz from a 32 fl oz kit at $36.00

$1.69

Pigment & inclusions

Color, glitter, dried flowers — per piece

$0.35

Mold share

$12.00 mold ÷ 40 pours before it wears out

$0.30

Findings & hardware

Keyring, jump rings, hooks, tassel

$0.45

Packaging

Bag or box, card, label

$0.55

Your labor

15 hands-on min at $20.00/hour

$5.00

Cost to make one piece

$8.34

Materials and mold wear come to $3.34 of that — the rest is your time. The price also has to cover Etsy's per-order charges — $0.45 in processing and listing fees, plus 9.5% of the price in percentage fees.

Suggested Etsy price

$17.99

At that price you keep $7.49 per piece — a true margin of 41.7% (rounding up to .99 nudges it just past your 40% target).

Wholesale price (the usual 50% of retail)

$9.00

What $2 either way does to your profit

$2 under

$15.99

$5.68 profit · 35.5%

Suggested

$17.99

$7.49 profit · 41.7%

$2 over

$19.99

$9.30 profit · 46.5%

How to price resin crafts

Most resin pricing advice starts and ends with the resin — the one line that barely matters.

In a small mold-cast piece, the resin is a dollar or two. The price is really set by the mold wearing out underneath it and by your minutes across three or four short sessions. Cost those honestly and the price falls out.

The shortcut: materials × 3 or × 4

The usual shortcut — a rule of thumb, and worth treating as one — multiplies your materials cost by three or four. It survives because it's easy, and because resin materials genuinely are cheap, which makes the answer feel safe. But it leaks in the same three places as every materials-only rule:

  • No labor — and labor is the biggest line a resin piece has.
  • No mold wear — the mold is a consumable, not a one-time purchase.
  • No marketplace fees.

Run it on the piece above: materials come to $3.34, so × 4 suggests roughly $13.35 — a price at which your margin is about 25% and your quarter hour of work is paid at well under the rate you set.

The formula: materials, mold, and minutes — then your margin

Add up everything one piece costs — resin by the ounce, pigment, its share of the mold, findings, packaging, and your hands-on minutes — then work backwards from the margin you want to keep: price = total cost ÷ (1 − 9.5% fees − your margin), with the fixed 45¢ per order added to the cost first. That is the math this calculator runs. It can't tell you what your market will bear — no formula can — but it guarantees the price you pick pays for your time at the rate you chose, instead of a rate you never actually checked.

  • Resin$1.69
  • Pigment & inclusions$0.35
  • Mold share$0.30
  • Findings & hardware$0.45
  • Packaging$0.55
  • Your labor$5.00
This calculator prices repeatable, mold-cast goods — keychains, coasters, trays, jewelry — where one pour makes a countable piece and the next pour makes its twin. A one-off art piece prices differently: on size, time, and artistry. For those, treat the formula's answer as the floor below which you're losing money, never as the price itself.

Time is the cost driver, and batching is the lever. In the example piece, your 15 minutes are $5.00 of an $8.34 cost — more than the resin, pigment, mold, hardware, and packaging combined. That is why two sellers with identical materials can honestly land on very different prices: one pours a single keychain start to finish, the other pours a tray of twelve, demolds them together, and sands them in one sitting. If your price looks high next to a competitor's, don't cut your rate — cut your minutes per piece by batching the sessions, and let the calculator show you the new number.

Failed pours are a cost too. A piece that traps a bubble, cures tacky, or tears at demolding ate real resin and real minutes and will never sell. Makers handle this two honest ways: fold a few percent into the resin-per-piece figure (the resin that stays in the cup is already in this calculator's example), or keep the margin at the healthy end of the range so the failures are absorbed by the pieces that succeed. What doesn't work is pretending the failure rate is zero.

One piece is easy. Your whole range is the hard part

Pricing a new design takes five minutes with a calculator like this one. The question that actually bites comes later: your resin kit goes up 20%, and suddenly some of the pieces you already sell are losing money. Which ones, and what should each new price be? Answering that takes your real order file and your real recipes. The kit's repricing report does exactly that: bump a material's price and see every product it squeezes, with the new price that holds each one's margin.

Already selling? See what Etsy actually took from your orders with the batch Etsy fee calculator.

Resin pricing questions, answered straight

Price from what one piece really costs — resin by volume, its share of the mold, pigment and inclusions, hardware, packaging, and your hands-on minutes — then let the price hold your margin after fees. On the example in this calculator, a mold-cast keychain uses 1.5 fl oz of resin from a $36, 32 oz kit ($1.69), 35¢ of pigment and inclusions, 30¢ of mold wear, 45¢ of findings, and 55¢ of packaging — but the biggest line is 15 minutes of your time at $5.00, for a total cost of $8.34. After Etsy's 9.5% in percentage fees and 45¢ per order, the price that holds a 40% margin is $17.99. Run your own piece through the calculator rather than borrowing a price — your minutes, not your resin, are what move the number.
It depends on which kind of resin work it is. For repeatable mold-cast goods — keychains, coasters, trays, jewelry — charge from the cost formula on this page: the example keychain costs $8.34 all-in and prices at $17.99 to hold a 40% margin after Etsy fees. For a one-off art piece — a river table, a large wall piece, a commission — nobody can hand you a formula price, because the value sits in the design and the artistry, not the resin. Use the formula anyway, as a floor: it tells you the lowest price at which the piece pays for its materials and your hours. Anything above the floor is the art premium, and it is yours to set.
For a small mold-cast piece, less in materials than most people guess — and more in time than almost anyone counts. The example keychain's materials come to $3.34: $1.69 of resin, 35¢ of pigment and inclusions, 30¢ of mold wear, 45¢ of findings, 55¢ of packaging. Then come 15 hands-on minutes — mixing, pouring, demolding, sanding edges, attaching hardware — worth $5.00 at $20 an hour, which is more than all the materials combined. Total: $8.34 a piece. If your own costing comes out far below that, the missing line is almost certainly your time.
No — curing is shelf time, not labor. A piece sitting in its mold for 24 hours isn't using your hands, and charging buyers for hours you spent doing something else inflates the price without making it more honest. Charge for your hands-on minutes only: mixing, pouring, demolding, sanding, finishing, packing. But curing does carry one real cost — while a piece cures, its mold is occupied and wearing. That is exactly what the mold-share line in this calculator is for: a $12 mold that survives 40 pours puts 30¢ on every piece, whether it cured for a day or a weekend.
The common convention is wholesale at about half the retail price — and with resin you have to run that convention against your costs before you agree to it, because your biggest cost is time, and time doesn't halve. Half of the example's $17.99 is $9.00, against a cost of $8.34: about 66¢ of headroom a piece. Wholesale can still work, but the lever is your minutes, not your materials — pouring twenty keychains in one session, demolding them together, and sanding in a batch cuts the hands-on minutes per piece sharply. Re-run the calculator with your real batched minutes before you quote a bulk price.
Selling direct to customers, most small makers aim for a gross margin around 40–50% — what is left of the price after materials, mold wear, your labor, and marketplace fees, before overheads like rent, ads, and taxes. That is the definition this calculator uses; 40% is the default. Resin argues for the healthier end of the range: pieces fail — a pour traps a bubble, a demold tears an edge — and a design that sells well gets copied fast, so the margin has to be earned while the piece is fresh and your molds are still good.
Because the old materials-times-four rule prices the cheap part and gives away the expensive part. On the example keychain, materials come to $3.34, so × 4 suggests roughly $13.35 — but that price leaves a margin of only about 25% once Etsy's fees come off, and it pays your 15 minutes of mixing, sanding, and finishing at well below the rate you set. The resin in a small piece genuinely is cheap. Your practiced hands are the product. Price them.

Ready to cost your whole range, not just one piece? Open the full workspace or see what the kit costs.